LAG SWITCH-FOR-Socom2 By-Half Lifeć Title- Make The Cut.. Date-Augest 22 2005 Ok being a part of a huge socom2 glitch clan i thought i might help a few on something rare that not many people know. Since socom3 is coming in the winter socom2 won't have much players on it as socom3 But thus there will allways be players and allways be some sort of ways to cheat. Well This is a FAQ on all the emails i resived asking how to make a lag Switch. Hears what you do. 1- Buy or get a long enough internet (Ethrnet) Wire that gos from your ps2 to a Modom or etc. 2- Cut the out side rubbe off the cord but not all of it only at the near end 3-Inside you will see all diffrent coloured wires. Cut the Green wire (Green Go's for [STAND BY] Or you can cut orange (Orange go's for [DISCONNECT/PullCord] 4- Cut the rubber around that wire as well IMPORTANT!!!!!!!!!!!!!!!!! INSIDE THAT TUBEING IS A METAL VERY THIN AS THIN AS A HAIR A VERY FINE METAL WIRE DO NOT CUT THIS AT ALL! AND MAKE SURE ALL POWER IS CUT OFF TO THE WIRE OR YOU MAY GET HIGHLY SHOCKED! 5-IF you cut the GreenWire then cut the Orange wire With Black in the middle. And if you cut the orange then cut the Green With Orange In the middle. 6- Attatch both ends into a light switch one at +1 and the other at -0 7- Connect the wire to your modom and then your ps2 GO ONLINE and when your in a game flick the light switch to ON Your player will lag Veyr badly and it is all most impossible to get hit or killed. Note- A lag Switch is very sensitive to Cold Air. The wires with in the Internet Cord can split into two from cold air Please keep your lag switch in a nice warm room. Thanks. Steve.